Item Code : GS-0034
Model : G2
Technical Features


Data Acquisition Unit (DAU)

  • Provided as required (a distributed solution can be provided as necessary to minimize cabling requirements and to maximize installation efficiency)
  • ”mount anywhere” solution
  • contains Audio, Video and NMEA Data Acquisition Modules (these can be mounted remotely in a distributed solution)
  • Compact (400mm x 600mm x 150mm)
  • 360 degrees for cable entry
  • Weighs only 17kg


Audio Module

  • Autonomous audio capture device
  • 16 input ports for capturing any combination of microphones and radio communications channels
  • Additional modules can be added as required
  • Includes up to 6 microphones as part of a base system


Video Module

  • Autonomous video capture device
  • 4 input ports for capturing images from the primary radar display and up to 3 additional displays
  • can accommodate 1600 x 1200 x 24-bit colour images
  • refresh rates up to 85Hz
  • can be configured for a capture interval as short as 3 seconds


NMEA Data Module

  • 6 inputs available in base system and fully expandable to allow any number of inputs
  • data is handled on a first-in-first-out basis, assembled and then transmitted to the Data Management Module


Data Processing Unit (DPU)

  • self-contained
  • can be mounted up to 75m away from Data Acquisition Unit
  • houses Data Management Module, Power Supply, Power Control Module and battery back-up system
  • compact (350mm x 400mm x 400mm)
  • weighs approximately 43kg


Data Management Module

  • low-power embedded computer with over 200,000 MTBF
  • equipped with advanced temperature protection, vibration isolation coils, input ports for data acquisition and output ports for FRM, playback PC, real-time display, remote monitoring, remote data access and/or optional Remote Storage Module


Power Supply

  • equipped with integrated battery charger
  • AC input range is 85-264V at 47-63Hz
  • DC input range is 19-28V
  • input is reverse polarity protected and has replaceable fuse


Power Control Module

  • monitors the status of input power
  • seamlessly switches essential VDR-100G2 components to battery power in the event of a blackout
  • communicates the power system status to the Data Management Module


Operation and Alarm Unit

  • indicates the system status
  • allows users to perform basic system diagnostic checks
  • provides a simple menu interface that allows users to secure the recorded data and enable or disable the optional Remote Storage Module.
  • equipped with:

- audio/visual alarm indicators

- 12-button keypad

- 4 x 20 character display

- relay output for monitoring in a central bridge alarm system


Download/Playback Software Module

  • password-protected (general playback and audio)
  • multiple display capability and output to ECDIS or ECS
  • recorded AIS data can be displayed graphically on an ECDIS or ECS
  • extremely user-friendly with search and fast forward features


Final Recording Medium (FRM)

  • fixed capsule
  • compact lightweight design
  • easy to install
  • powered by Power Control Module
  • can be mounted 75m away from DPU


Rate : Rs.125000/-